A-A-1681B
Lens interchangeability. Lens shall be operator interchangeable and easily installed.
Lamp. Rated average life of the lamp shall be not less than
500 hours and shall be and replaceable without easily accessible special tools.
Electrical characteristics. Machine shall operate on 120 volts, 60 Hz.
Power cord. The power cord shall be at least 1.8 meters
(6 feet) long.
Frame format.
Lens magnification of 24X, the reader shall display no less than one frame of 98 frame format, vertically on the screen.
Lens magnifications of between 29X - 32X; 32.5x - 37x, respectively are all acceptable, provided the projected image is confined within available screen area and printed image is complete within the boundaries of the cut sheet of paper. The reader shall display no less than one frame of 208/270 frame format, vertically on the screen.
Zoom lens. A zoom lens with magnification ranges of 24X – 32x (Style D) and 24X -37X (Style E) may be substituted for the dual lens holder and lenses provided the projected and printed images meet the same aforementioned criteria.
Indexing system. The reader shall have a separate indexing system for 1:24 source document and COM fiche, and 1:42 and 1:48 COM fiche, as applicable.
Image rotation. 360 degree image rotation shall be available, as specified:
1) by carrier on single lens unit.
2) by carrier on dual lens unit.
3) on low magnification lens.
4) on high magnification lens.
5) on both high and low magnification lenses of the same unit.
Note: If image rotation system employed is by single carrier and the use of a double carrier automatically deletes the image rotation feature, indicate same by stating that image rotation is not available on a single lens and a dual lens unit with dual carrier. However, if the image rotation feature is not deleted from the dual carrier models (single and dual lenses) then there is no need for the aforementioned statement.
Paper size. Printers shall be either roll or sheet-fed. The rolls shall be at least 45.7 meters (150 feet) long.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business